Understanding Flange Bearings

SINO BEARINGS (KMK brand) is a bearing manufacturer with 20+ years of experience, producing flange bearings in chrome steel, stainless 440C/630, with 2/3/4-bolt flanges. This guide covers selection, applications, and the advantages buyers should know when sourcing from a flange ball bearing manufacturer.

Flange Bearings are built from chrome steel, stainless 440C/630, with 2/3/4-bolt flanges, typically in sizes ranging from bore 4 mm to 60 mm, F/FH/FK/FL series. They are widely used in 3D printers, small motors, conveyors, positioning stages.

Step 1: Define the Load Condition

• Radial load: the dominant force perpendicular to the shaft.
• Axial (thrust) load: force along the shaft axis.
• Combined / moment load: requires a bearing designed for mixed loading.

Step 2: Match the Material to the Environment

For wet, corrosive, or hygienic duty, choose stainless or ceramic construction. For maximum load at low cost, chrome steel remains the default. SINO BEARINGS supplies all of these from one source.

Step 3: Select Precision and Sealing

• Precision: P0/P6 for general use, P5/P4 for spindles and instruments.
• Seals: 2RS for contamination protection, ZZ for high speed, open for sealed housings.

Step 4: Verify Sizing

Confirm bore, outer diameter, and width against your shaft and housing. Flange Bearings from SINO BEARINGS cover bore 4 mm to 60 mm, F/FH/FK/FL series, with custom sizes available on request.

Why Source from SINO BEARINGS?

• 20+ years of precision bearing manufacturing under the KMK brand
• Materials from chrome steel to chrome steel, stainless 440C/630, with 2/3/4-bolt flanges
• Custom design and low-MOQ prototyping
• Worldwide shipping with full documentation

Discuss your requirement with kevin@sinoti.com or browse our Flange Bearings catalog.

SINO BEARINGS (KMK) - Perfect Quality -- Great Service -- Customized.

Source: SINO BEARINGS