Notes for micro bearing:

1. Place the yoke iron on the end face of the main engine.

2. Insert the plug into the power socket with the control switch.

3, check whether the grounding line is good, after the power with the test pen test.

4, press the start button, the host power.

5, check the yoke to the ground should be no voltage.

6. Press the stop button to power off the host and stop heating.

7, according to different specifications of miniature bearings or other workpieces, choose different yoke iron sleeve, put the yoke iron on the top surface of the main machine, should be consistent with smooth.

8. When heating the micro bearing, the sensor should be inserted into the "sensing socket", and the sensor should be close to the heated workpiece.