1.Ensure that the storage of thin-wall bearings and the surrounding environment should be clean, even if it is very small dust into the interior of thin-wall bearings, will increase the wear, vibration and noise of thin-wall bearings.

 

2. When installing thin-wall bearings, strong stamping is absolutely not allowed, because the groove of thin-wall bearings is very shallow, and the inner and outer rings are very thin. Strong stamping will lead to the separation of the inner and outer rings of bearings and other damage. Therefore, in the installation, we should first determine the range of production and installation clearance with the manufacturer, and cooperate with the installation according to the range of clearance.

 

3. In order to prevent corrosion of thin-wall bearings, it is necessary to ensure that the storage environment is dry and free from moisture, and stored in space away from the ground. When removing the bearing for bearing use, it is necessary to wear clean gloves to avoid moisture or sweat sticking to the bearing resulting in rust.

 

In the process of using thin-wall bearings, if improper use or poor coordination can not achieve the desired effect of thin-wall bearings, so we must pay attention to the above details when using thin-wall bearings