PRODUCTS

nstallation matters of thrust self-aligning roller bearing

SINO BEARINGSMar 29, 2022

Installation matters of thrust self-aligning roller bearing

thrust self-aligning roller bearing

1. When installing the bearing, the bearing oil seal shall be cleaned and then coated with clean high-quality lubricating oil.

2. When installing the bearing, the stress shall be uniform without hammering. If the fit interference is large, put the bearing into mineral oil and heat it to 90 ° - 100 °, and then install it immediately.

3. The warehouse for storing bearings shall be clean and the relative humidity shall not exceed 65%.

4. The bearings in stock shall be cleaned and oiled every other year, and the oil seal packaging shall be kept in good condition.

5. When using the bearing, there should be a good sealing and dust-proof device, and the working condition should be checked frequently.

By KMK · Bearing design & application specialists

This article is prepared by the SINO BEARINGS (Sinoti Tech) engineering team, based on published bearing standards (ABEC / ISO P0–P2), material datasheets, and field application experience across industrial, food, medical and aerospace uses. For manufacturer background, certifications and facilities, see our About page.

Bearing Mounting and Installation: Fits, Clearance and Induc How to Choose the Right Thrust Bearings for Your Application Thrust Bearings Applications Across Key Industries -KMK BEAR Numerical Modeling of Wear in a Thrust Roller Bearing under Supporting fast-turning shafts using thrust spherical roller

Previous丨

Usual bearing seals

Next丨

Installation matters of Spherical Roller Bearings

Reture