PRODUCTS / BALL BEARINGS_SINO BEARINGS

PRODUCTS

BALL BEARINGS

HOME > PRODUCTS > BALL BEARINGS >

ANGULAR CONTACT BALL BEARINGS
Angular contact An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that acts to separate the races axially. So the angle of...
THIN SECTION BEARINGS
WHAT IS A THIN SECTION BEARING AND HOW DOES IT REDUCE COST? Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured...
SELF-ALIGNING BALL BEARINGS
Self-aligning ball bearings, such as the bearing shown in the picture, are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway. This construction allows the bearing to tolerate...
DEEP GROOVE BALL BEARINGS
Deep-groove ball bearings In a deep-groove radial bearing, the race dimensions are close to the dimensions of the balls that run in it. Deep-groove bearings support higher loads than a shallower groove. Like angular contact bearings, deep-g...
THRUST BALL BEARINGS
Thrust ball bearings An axial or thrust ball bearing uses side-by-side races. An axial load is transmitted directly through the bearing, while a radial load is poorly supported and tends to separate the races, so that a larger radial load i...

Total 1 page 5 articles

+86-28-81454188

SERVICE

24X7 HOTLINE： +86-28-81454188